Oğlum ve ben süperkahraman koliğiz.Ben "Süperman"'ci oğlum ise "Spiderman" ci, tabi oğlum zaman zaman "Ironman","Mr Incredible","Transformers (Bumblebee)"'ye kayıyor onu da belirtmek lazım.Tabi durum böyle olunca bir baba olarak kostüm ve oyuncaklardan paçayı kurtaramıyorum.Kostum ve oyuncaklar bir yere kadar süperkahramanlık duygularımızı tatmin ediyor.Farklı ne yapabilirdik ki değil mi?

Hemen hemen bütün kahramanların ortak noktası uçmalarıdır.Bende dedim madem bahçeden bir örümcek yakalayıp oğluşu ısırtamayacağım ve "yalnızlık kalesi" tapusu benim olmayacak dedimki en azından uçalım...

Duygu muhteşemdi.Bir babalık görevini daha yerine getirmiş olmanın huzuru içindeyim :)

 

Cs_hata_yakalamak.pdf (395,48 KB)
 

 

Canım sıkılmış eski arkadaşlarla msn leşirken bi arkadaşım bana tasarlamış olduğu web sitesinin taslağını gösterdi.

Default.aspx de şirketin başkanı ve yardımcısının boy boy resimleri ve mesajları.

Yahu nedir bu ego,

microsoft.com da açılış sayfasında Bill Gates'in masada oturmuş gülen bi fotoğrafı var mı?
mesaj veriyormu ? 

Arkadaşa saygıdan adresi vermiyorum...

 

Bazı zamanlar vardır, bir virgül bile birkaç saate mal olabilir.İşte şansıma geliştirme aşamasında yakaladığım bir "copy paste programming" hatası.

if @va_niccheckcfg_id=0
     begin
         insert
             va_niccheckcfg_tbl
         values
             (
             @va_niccheckcfg_name,
             @va_niccheckcfg_status,
             @va_niccheckcfg_esxip
             )
     end
 else
     begin
         update
             va_niccheckcfg_tbl
         set
             va_niccheckcfg_name=@va_niccheckcfg_name,
             va_niccheckcfg_status=@va_niccheckcfg_status,
             va_niccheckcfg_esxip=@va_niccheckcfg_esxip
         where
             @va_niccheckcfg_id=@va_niccheckcfg_id
     end

evet farketmişsinizdir, update komutunun koşulunda
@va_niccheckcfg_id=@va_niccheckcfg_id
kodu bütün tabloyu 2 sn de allak bullak edebilecek bir potansiyele sahip.

AMAN DİYORUM :)
 

Dün akşam uzatmanın sonlarına doğru yediğimiz talihsiz golden sonra gözlerimi ekrandan alıp moralim bozuk bir şekilde youtube izlemeye başladım.Sonra yaptığımız son dakika atağını görünce içimden bir belki geçti.Gol olduğunda gözlerime inanamadım ve golü 2-3 sn gecikmeli idrak edebildim.Anladığımda ise ayağa firladım ve bu arada heyecandan elimde tuttuğum evlilik yüzüğüm camdan fırladı :).

Dışarı çıktığımızda ise karnaval havası vardı.Gece süperdi.Bir şey farkettim ne kriz, ne de gündemde dolaşan başka sıkıntılardan eser yoktu...Herkes yarın yokmuş gibi eğleniyordu...

Beni en çok gururlandıran ise yabancı basında dinlediğim bir haberdi.Sunucu Viyana'daki havanın muhteşem olduğunu, oradaki göçmenlerimizin diğer takım taraftarlarından farklı olarak bir futbol takımını değil, Türkiye'yi gönülden desteklediklerini ve biz de burdayız sizin yanınızdayız mesajını verdiğini, Fatih Terim'in çok alçakgönüllü ve mükemmel bir direktör olduğunu maçtan sonra Hırvat t.direktörünü teselli ettiğini, futbol takımının kendi değimiyle "mid-sized players"  olduğunu fakat bu oyunlarıyla aslında çok değerli oyuncular olduklarını kanıtladıklarını bildirdi.

Dediğim gibi sizlere tonlarca altın helal olsun çocuklar...

 

ise;

1- SqlDataSource'un CancelSelectOnNullParameter değeri True ise bunu False yapın.Tekrar deneyin.

hala olmadı diyorsanız;

2- Select olayının calisip calismadiğini anlamak için ya sql profiler kullanın ya da SqlDataSource'un SelectCommand'ina hatalı bir sql sorgusu yazın.

 

Bir proje yaptınız ve assembly'yi gac a install ettiniz (gacutil -I c:\proje\proje.dll)
Proje.dll i kullanmak istediğiniz diğer projenize eklemek istediğinizde add references penceresinde yarattığınız assembly'yi göremediniz?

Ms destek açıklaması

Registry de ilgili ayarları yaptıktan sonra artık assembly'nizi add reference penceresinde görebilirsiniz.

 

Evet yaklaşık 15 senedir kaykay :) kaymıyordum.Geçenlerde akmerkezdeki sport point e girince dayanamadım ve bir foundation skateboard aldım.Rulman,tekerlekler,trucklar,sliderlar,board, zımpara vs hic bakmadım.Bu haftasonu yazlıkta 15 sene sonra ilk denememi yaptım.

ollie yapabilmiştim. :) eğer Türkiyede braniac tarzında bir program olsaydı iyi bir test olurdu :)

 

I'm currently in the planning stages of building a hosted Java web application (yes, it has to be Java, for a variety of reasons that I don't feel like going into right now). In the process, I'm evaluating a bunch of J2EE portlet-enabled JSR-compliant MVC role-based CMS web service application container frameworks.

And after spending dozens of hours reading through feature lists and documentation, I'm ready to gouge out my eyes.

Let's pretend I've decided to build a spice rack.

I've done small woodworking projects before, and I think I have a pretty good idea of what I need: some wood and a few basic tools: a tape measure, a saw, a level, and a hammer.

If I were going to build a whole house, rather than just a spice rack, I'd still need a tape measure, a saw, a level, and a hammer (among other things).

So I go to the hardware store to buy the tools, and I ask the sales clerk where I can find a hammer.

"A hammer?" he asks. "Nobody really buys hammers anymore. They're kind of old fashioned."

Surprised at this development, I ask him why.

"Well, the problem with hammers is that there are so many different kinds. Sledge hammers, claw hammers, ball-peen hammers. What if you bought one kind of hammer and then realized that you needed a different kind of hammer later? You'd have to buy a separate hammer for your next task. As it turns out, most people really want a single hammer that can handle all of the different kinds of hammering tasks you might encounter in your life."

"Hmmmmmm. Well, I suppose that sounds all right. Can you show me where to find a Universal Hammer."

"No, we don't sell those anymore. They're pretty obsolete."

"Really? I thought you just said that the Universal Hammer was the wave of the future."

"As it turns out, if you make only one kind of hammer, capable of performing all the same tasks as all those different kinds of hammers, then it isn't very good at any of them. Driving a nail with a sledgehammer isn't very effective. And, if you want to kill your ex-girlfriend, there's really no substitute for a ball-peen hammer."

"That's true. So, if nobody buys Universal Hammers anymore, and if you're no longer selling all those old-fashioned kinds of hammers, what kinds of hammers do you sell?"

"Actually, we don't sell hammers at all."

"So..."

"According to our research, what people really needed wasn't a Universal Hammer after all. It's always better to have the right kind of hammer for the job. So, we started selling hammer factories, capable of producing whatever kind of hammers you might be interested in using. All you need to do is staff the hammer factory with workers, activate the machinery, buy the raw materials, pay the utility bills, and PRESTO...you'll have *exactly* the kind of hammer you need in no time flat."

"But I don't really want to buy a hammer factory..."

"That's good. Because we don't sell them anymore."

"But I thought you just said..."

"We discovered that most people don't actually need an entire hammer factory. Some people, for example, will never need a ball-peen hammer. (Maybe they've never had ex-girlfriends. Or maybe they killed them with icepicks instead.) So there's no point in someone buying a hammer factory that can produce every kind of hammer under the sun."

"Yeah, that makes a lot of sense."

"So, instead, we started selling schematic diagrams for hammer factories, enabling our clients to build their own hammer factories, custom engineered to manufacture only the kinds of hammers that they would actually need."

"Let me guess. You don't sell those anymore."

"Nope. Sure don't. As it turns out, people don't want to build an entire factory just to manufacture a couple of hammers. Leave the factory-building up to the factory-building experts, that's what I always say!!"

"And I would agree with you there."

"Yup. So we stopped selling those schematics and started selling hammer-factory-building factories. Each hammer factory factory is built for you by the top experts in the hammer factory factory business, so you don't need to worry about all the details that go into building a factory. Yet you still get all the benefits of having your own customized hammer factory, churning out your own customized hammers, according to your own specific hammer designs."

"Well, that doesn't really..."

"I know what you're going to say!! ...and we don't sell those anymore either. For some reason, not many people were buying the hammer factory factories, so we came up with a new solution to address the problem."

"Uh huh."

"When we stepped back and looked at the global tool infrastructure, we determined that people were frustrated with having to manage and operate a hammer factory factory, as well as the hammer factory that it produced. That kind of overhead can get pretty cumbersome when you deal with the likely scenario of also operating a tape measure factory factory, a saw factory factory, and a level factory factory, not to mention a lumber manufacturing conglomerate holding company. When we really looked at the situation, we determined that that's just too complex for someone who really just wants to build a spice rack."

"Yeah, no kidding."

"So this week, we're introducing a general-purpose tool-building factory factory factory, so that all of your different tool factory factories can be produced by a single, unified factory. The factory factory factory will produce only the tool factory factories that you actually need, and each of those factory factories will produce a single factory based on your custom tool specifications. The final set of tools that emerge from this process will be the ideal tools for your particular project. You'll have *exactly* the hammer you need, and exactly the right tape measure for your task, all at the press of a button (though you may also have to deploy a few *configuration files* to make it all work according to your expectations)."

"So you don't have any hammers? None at all?"

"No. If you really want a high-quality, industrially engineered spice rack, you desperately need something more advanced than a simple hammer from a rinky-dink hardware store."

"And this is the way everyone is doing it now? Everyone is using a general-purpose tool-building factory factory factory now, whenever they need a hammer?"

"Yes."

"Well…All right. I guess that's what I'll have to do. If this is the way things are done now, I guess I'd better learn how to do it."

"Good for you!!"

"This thing comes with documentation, right?"

Original post: http://discuss.joelonsoftware.com/default.asp?joel.3.219431.62